Installing a Nest Door Lock, Like a Pro

Step by step.....

Step 1:

• Unpack Nest door lock.
• Remove old dead bolt
• Remove bolt drive.

Step 2:

• Install Nest Bolt Drive.
• Install keypad from front
• Install rear mount
• Use the long black screws (Most applications)
• Connect rear mechanism, connect wire with marked side outwards.
• Use two small back screws to mount to rear base.
• Test manually, lock and unlock with door shut.

Step 3:

• Install the 4 AA batteries.
• Set master code 9999 ( Make a temp code) you'll change later.
• Let test of bolt lock and unlock take place with the door open.
• Shut door from outside, click the yale logo to lock.
• Then click the yale logo, enter temp code 9999 and unlock.
• If the bolt wont engage fully into wall, expand frame hole out more/test alignment.

Step 4:

• Set up the nest connect.
• Scan on customers phone/nest app.
• Make sure the phone is on the SAME network as the one connecting the nest Connect too.
• Once set up, click add another product, scan the code on the back of the door lock.
• Push and hold the privacy button (plastic button on read of nest)
• Nest lady will say ready to add to app. Continue with the nest app install.
• Set new code, test lock in app. That's it!

Nest Yale Doorlock